SPCMAKER 100SP 100MM FPV Racing Drone BNF Version RunCam Micro Swift Camera Omnibus F3 flight controller 15A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Racing Drone / BNF

SPCMAKER 100SP 100MM FPV Racing Drone BNF Version RunCam Micro Swift Camera Omnibus F3 flight controller 15A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)

    Please select the information you wantX
  • Voltage:
  • Model:
(997 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(1)

Brand name: SPC Maker
Product model: SPC 100SP
Wheelbase: 100mm
Size: 80mm*94mm*35mm
Weight: 77g (without battery)
Flight weight: 110g(Include battery)
Motor: SPC Maker S1104 7500KV brushless motor
ESC: 15A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 3-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: RunCam Micro Swift 1/3 \"600TVL FPV camera 2.3mm lens CCD camera
VTX: 5.8g 25MW-100MW 40CH Video transmitter
Flight controller: Omnibus F3
OSD: Betaflight OSD
Firmware of flight controller: betaflight_3.2.0_OMNIBUS F3
Flight time: 4 minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mAh 30C lipo battery

VX86-1 Ominibus F3 flight controller
Name: VX86-1 MINI F3
Input:2-4 Cell LiPo
Firmware:OMNIBUS F3
Size: 27x27 mm
Mount holes: 20x20 mm
Weight: 3.5 g
-STM32 F303 MCU
-MPU6000 6 axis SPI Gyro & Accelerometer
-Dshot support
-Drag and Drop OSD configured via Betaflight Configurator
-SBUS/PPM AND Spketrum dsm-x Ports
-On-board Video Filter(only can supply 5V to VTX and Camera)

VX86-2  15A 4 IN 1 DSHOT ESC 2-4S Lipo
Continuous Current: 15A
Burst Current: 25A≥10S
Input Voltage: 2S-4S LiPO
Dimensions: 29x31mm
Firmware: BLHeLi_S
Input signal:Dshot150&Dshot300
&Dshot600(PWM are not recommended)
VX86-3 25mW/100mW 5.8G 40CH 5645-5945MHz VTX
Model: VX86-3
Input voltage:5-6V
Power:25mW/100mW can be select
Operation Current:310mA@5.5V@25mW/350mA@5.5V@100mW
Frequency range:5.8G 40CH 5645-5945MHz
Independent external power amplifier for better signals.
Code description: /u_file/1711/file/5b832a7b0b.pdf

Model : RunCam Micro Swift
Image Sensor: 1/3\" SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens:2.3mm Lens(M8) FOV145°
Signal System:NTSC
S/N Ratio:>60dB (AGC OFF)
Electronic Shutter Speed :1/60~100,000
Auto Gain Control (AGC) :Yes
Back Light Compensation (BLC):Yes
Min. Illumination:0.01Lux@1.2F
Power:DC 5-36V
Net Weight:5.6g

1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D16 mode),and XJT (D16 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support  TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG.
Receiver Setup and Binding Methods

Quads with DSM Compatible Receivers
Binding method for Spektrum radios:
Pair code: (for code, not external battery)
1. The receiver for the Cleanflight, Betaflight firmware flight control, you can enter the CLI command line
2. (set spektrum_sat_bind = 9 )carriage return,
3. In the input (save) carriage return.
4. Disconnect the USB cable, re-power to the flight control, the receiver orange indicator light will flash, said the receiver into the code waiting mode.
5. Open the remote control, the remote control into the code mode, the success of the code, the orange light is always bright, no signal, orange light off.

Quads with FrSky Receivers
Binding with FrSky Taranis X9D Plus Transmitter
1.Turn on your Taranis X9D Plus transmitter,goto“Model Setup”(Press MENU and PAGE button once).In the“Internal FR”section,choose Mode=D16,Channel Range=CH1-16,Receiver No.01,and then click“Bind”,the transmitter will start beeping.
2.Power up the XM+ receiver while holding the F/S buttn(aka.Bind button).The LED on the receiver will start flashing,that means binding has completed.
3.Power off Transmitter and Receiver
4.Turn on the transmitter and power on the Receiver,you should see the Greed LED on the receiver,that means it has bound with your transmitter.

Quads with FlySky Receivers
Binding method for FlySky radios:
Support radios with the second generation protocol (AFHDS 2A).
1.Enter the binding mode in the radio.
2.Hold the binding button on receiver, and power it on. Rapid flash of LED indicates the receiver is in binding mode. If binding is successful, the LED light will change to slow flash.
3.Exit binding mode of the radio. The LED light on receiver should become solid, indicating completion of binding.
Enable s.Bus mode:
Output modes can be switched in lieu of normal communication between radio and receiver. Hold the binding button for 2 seconds to change to s.Bus mode. If LED light flashes rapidly two times and off for 1 second, then it is successfully changed to s.Bus output mode.
Quads with Futaba Compatible Receivers

Binding method for Futaba radios:
Compatible with Futaba radios support FASST.
1.Set the radio to FASST mode. Hold the binding button on receiver and then power it on. The red LED should flash rapidly. Release binding button the LED should flash red and green alternately, and then turns to solid green to indicate a successful binding. It may requires several trials to complete a binding. A solid red LED indicates the binding is not established.
2.Fail safe can be setup in the radio, and can be set after binding process. Hold the binding key for 2-3 seconds, the LED indicator of failsafe will flash rapidly and then turns to solid green, indicating it is in fail safe mode.

Package include:
1 x SPC Maker 100SP Frame
1 x Omnibus F3
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x 15A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 3-blades propeller CW
4 x 50mm 3-blades propeller CCW
1 x RunCam Micro Swift 1/3 \"600TVL FPV camera 2.3mm lens CCD camera
1 x 5.8G 25mW-100mW 40CH  VTX
2 x 11.1V 350mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4x3 * 100mm nylon band
2x12mm * 150mm magic band
2x15mm * 50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter
Average rating: 5.0 based on 1 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:adult doll