Your position: Home > Racing Drone > BNF

SPCMAKER 95GF 95MM FPV Racing Drone BNF Version RunCam Micro Swift Camera Omnibus F3 flight controller 15A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)

Item Code: SPC959501
Sold: 29
Original Price:
USD $180.00
Price:
(20% OFF)
(Only 5 days)
Save $36.00(20% Off)
SKU:
959501
    Please select the information you wantX
  • Voltage:
    11.1V
  • Model:
    DSM2 FRSKY FLYSKY FUTABA
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units
  • Description

Brand name: SPC Maker
Product model: SPC 95GF
Wheelbase: 95mm
Size: 76mm*87mm*50mm
Weight: 72g (without battery)
Flight weight: 105g(Include battery)
Motor: SPC Maker S1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: RunCam Micro Swift 1/3 "600TVL FPV camera 2.3mm lens CCD camera
VTX: 5.8g 25MW-200MW 48CH Video transmitter
Flight controller: OSDOminibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4 minutes 
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mAh 30C lipo battery

Flight controller parameters:
Ominibus F3 flight controller integrated with OSD module.
1.Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module (This is 6DOF version, no barometer and compass).
(1) Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller than 130mm to exhibits its advantages in small dimensions and multiple functions.
(2) It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting hole size is 20mm (2.5mm hole).
(3) Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
(4) STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
(5) Supports 2-4S LiPo input.
(6) Built-in 5V 1A BEC.
(7) Supports popular receivers such as SBus, PPM, DSMX.
(8) Buzzer, programmable LED, voltage monitoring, HLHeli ESC.

2.4 in 1 BLheli_s ESC:
Specifications:
Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A 
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g

Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS  EFM8BB21F16G
MOS FET: TPN2R703NL
Driver: new generation 3 in I MOS
Specification of Mini F3 flight controller tower:
Weight: 8g
Supported frames: smaller than 280mm
Constant current: 10A*4 (maximum current: 15A*4, 5s)


Parameters
Image Sensor: 1/3" SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens:2.3mm Lens(M8) FOV145°
Signal System:NTSC
S/N Ratio:>60dB (AGC OFF)
Electronic Shutter Speed :NTSC: 1/60~100,000
Auto Gain Control (AGC) :Yes
Back Light Compensation (BLC):Yes
Min. Illumination:0.01Lux@1.2F
WDR:D-WDR
DNR :2DNR
Day/Night:Color/Auto/B&W
Power:DC 5-36V
Net Weight:5.6g
Dimensions:19mm*19mm*19mm

Transmission frequency group::
Frequency band: 5362-5945MH
Channel: 48
A:Ch1:5740MHz       Ch2:5760MHz      Ch3:5780MHz    Ch4:5800MHz
  Ch5:5820MHz       Ch6:5840MHz      Ch7:5860MHz    Ch8:5880MHz
B:Ch1:5705MHz       Ch2:5685MHz      Ch3:5665MHz    Ch4:5645MHz
  Ch5:5885MHz       Ch6:5905MHz      Ch7:5925MHz    Ch8:5945MHz
C:Ch1:5865MHz       Ch2:5845MHz      Ch3:5825MHz    Ch4:5805MHz
  Ch5:5785MHz       Ch6:5765MHz      Ch7:5745MHz    Ch8:5725MHz
D:Ch1:5658MHz       Ch2:5695MHz      Ch3:5732MHz    Ch4:5769MHz            
  Ch5:5806MHz       Ch6:5843MHz      Ch7:5880MHz    Ch8:5917MHz
E:Ch1:5733MHz       Ch2:5752MHz      Ch3:5771MHz    Ch4:5790MHz                   
   Ch5:5809MHz       Ch6:5828MHz      Ch7:5847MHz    Ch8:5866MHz
F:Ch1:5362MHz       Ch2:5399MHz       Ch3:5436MHz    Ch4:5473MHz  
   Ch5:5510MHz       Ch6:5547MHz       Ch7:5584MHz    Ch8:5621MHz
Modulation type: FM
Ambient temperature:25℃
Video input voltage:1.0Vp-p,(75Ώ)

Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D16 mode),and XJT (D16 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support  TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG. 
Receiver Setup and Binding Methods

Quads with DSM Compatible Receivers
Binding method for Spektrum radios:

Pair code: (for code, not external battery)
1. The receiver for the Cleanflight, Betaflight firmware flight control, you can enter the CLI command line
2. (set spektrum_sat_bind = 9 )carriage return,
3. In the input (save) carriage return.
4. Disconnect the USB cable, re-power to the flight control, the receiver orange indicator light will flash, said the receiver into the code waiting mode.
5. Open the remote control, the remote control into the code mode, the success of the code, the orange light is always bright, no signal, orange light off.

Quads with FrSky Receivers
Binding with FrSky Taranis X9D Plus Transmitter
1.Turn on your Taranis X9D Plus transmitter,goto“Model Setup”(Press MENU and PAGE button once).In the“Internal FR”section,choose Mode=D16,Channel Range=CH1-16,Receiver No.01,and then click“Bind”,the transmitter will start beeping.
2.Power up the XM+ receiver while holding the F/S buttn(aka.Bind button).The LED on the receiver will start flashing,that means binding has completed.
3.Power off Transmitter and Receiver
4.Turn on the transmitter and power on the Receiver,you should see the Greed LED on the receiver,that means it has bound with your transmitter.

Quads with FlySky Receivers
Binding method for FlySky radios:
Support radios with the second generation protocol (AFHDS 2A).
1.Enter the binding mode in the radio.
2.Hold the binding button on receiver, and power it on. Rapid flash of LED indicates the receiver is in binding mode. If binding is successful, the LED light will change to slow flash.
3.Exit binding mode of the radio. The LED light on receiver should become solid, indicating completion of binding.
Enable s.Bus mode:
Output modes can be switched in lieu of normal communication between radio and receiver. Hold the binding button for 2 seconds to change to s.Bus mode. If LED light flashes rapidly two times and off for 1 second, then it is successfully changed to s.Bus output mode.
Quads with Futaba Compatible Receivers

Binding method for Futaba radios:
Compatible with Futaba radios support FASST.
1.Set the radio to FASST mode. Hold the binding button on receiver and then power it on. The red LED should flash rapidly. Release binding button the LED should flash red and green alternately, and then turns to solid green to indicate a successful binding. It may requires several trials to complete a binding. A solid red LED indicates the binding is not established.
2.Fail safe can be setup in the radio, and can be set after binding process. Hold the binding key for 2-3 seconds, the LED indicator of failsafe will flash rapidly and then turns to solid green, indicating it is in fail safe mode.

Package include:
1 x SPC Maker 95GF Frame
1 x Ominibus F3 flight controller integrated with OSD module
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x RunCam Micro Swift 1/3 "600TVL FPV camera 2.3mm lens CCD camera
1 x 5.8G 25mW-200mW 48CH  VTX
2 x 11.1V 350mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4x3 * 100mm nylon band
2x12mm * 150mm magic band
2x15mm * 50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter
Customer Reviews
Average rating:

5(based on 30 reviews)

Share your thoughts with other customers